The Thomson TG787 has two USB ports. Can be connected to U disk. Mobile hard disk. Card reader, etc. Printer can also be connected. But connect the printer. Many people do not know how to set up a computer connected to a thomson wireless router to use the printer. Here is how to set up Thomson TG787 as a print server
THomson series THomson tg787 wireless routers
printer
Install the printer driver you are using on your computer.
Connect the USB port of the printer to the USB port of the THomson tg787. Turn on the power. The printer cannot use USB power. Don't forget to plug in the power cord
Click the Start menu -> Run -> Enter: telnet 192.168.1.254 Press Enter -> The default user name is Administrator [the first letter is uppercase]- > The password is blank to log in to the route configuration page.
Run the following command: :printersharing LPD config state enabled:printersharing LPD queue add name=TG787 type=Raw:saveall:exit:system reboot
Go to Control Panel -> Printer & Fax -> Add Printer -> Select Add Network Printer; Enter address :192.168.1.253. Follow the prompts.
After successful addition, you can print; A network printer must be installed on all computers in WLAN and LAN to use the printer server. Repeat step 5