language

467Currently online
62Today's Reading
48Share Today
Multilingual display

Installation method of hydraulic compactor

2018-04-30 12:48:26

In the use of hydraulic compacting machine, it is necessary to install on the excavator or loader, and use the hydraulic power of the loader and excavator to carry out the transition, tamping and other operations, so how to install the hydraulic compacting machine on the loader has become a problem for most people.

Tools/Materials
1

wrench

2

specification

Methods/Steps
1

Position the hydraulic compactor on a flat, solid ground to keep the mounting parts vertical.

2

This information comes from experience

3

Connect the connection frame of the hydraulic compactor with the power arm of the loader, install the positioning pin, and pay attention to applying lithium ester lubrication on the positioning pin.

4

The inlet oil and return oil of the hydraulic pump of the loader are docked with the inlet oil and return oil circuit of the compactor respectively, and fixed on the equipment.

5

The sensor, solenoid valve and control line of the hydraulic compactor are installed and fixed, and the relevant marks are made.

6

Install the control box of the hydraulic compactor in the cab of the loader, weld the base, and disconnect the power line of the loader during welding to avoid damage to the control line of the body. The output control line and input power line are introduced into the control box, and the input power supply voltage is DC24V, a total of two phases. The positive pole is connected to the loader power supply safety, and the negative pole can be taken by the iron.

Matters needing attention
1

The home can take care of the installation

2

Someone with relevant experience must be responsible for installation

Recommendation