language

1137Currently online
162Today's Reading
19Share Today
Multilingual display

Proper use and illustration of Soder-Wick® tin wire

2018-04-29 00:00:20
1

Tin-absorbing wire is a special repair tool whose appearance greatly reduces the rework/repair time of electronic products, and greatly reduces the thermal damage to the circuit board

2

The danger of... The precise geometric braid design ensures maximum surface tension and tin absorption. The solder wire optimizes the heat transfer from the braid to the solder joint, thereby speeding up the solder absorption. And very little flux residue is also accelerated

3

The cleaning process of the PCB can even be completely eliminated. It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion. It has good tin performance and clean tin absorption. In the soldering, after the chip is removed, there will be a large number of pieces on the circuit board

4

The solder, which will affect the chip welding. Usually used to clean the tin belt, the method is to put the soldering iron on the tin belt and then slowly move on the chip pad, so that the solder will be sucked up by the tin belt when it melts, sucking up the tin between the feet, which

5

The board is very clean. After that, it is best to wash the chip position of the machine board thoroughly with washing water. In the tin removal tool, the tin absorber can be used for general aluminum electrolytic capacitors, and the tin belt can be used for relatively large patch components.

Tools/Materials
1

Soder-Wick® tin absorbing wire

2

Soldering iron

3

Circuit board with solder joints to be removed

Methods/Steps
1

First of all... Look at the two solder joints on the far left of the circuit board... Wait for a demonstration to clean the solder joint

2

Get the Soder-Wick® tin absorbing wire

3

The wire is pressed against the solder joint, and the soldering iron is pressed back on

4

Look, the tin is sucked up, the way it's not cleaned up... It's already clean... Then take alcohol or other cleaning agent to wipe on the line!

Matters needing attention
1

Be safe when using the soldering iron

2

When encountering some solder that is difficult to absorb, adding a little solder paste can be perfectly solved.

Recommendation