language

142Currently online
35Today's Reading
26Share Today
Multilingual display

You glass cutting machine optimize the use of typesetting software

2018-05-12 03:12:42

This paper mainly introduces the basic operation steps of this typesetting optimization software. It should be noted that this software can be matched with the cutting machine, and the file format of different cutting machines is not the same.

Tools/Materials
1

Your friend glass cutting machine optimization typesetting software.

2

computer

Step 1: Need to cut the finished product (input the finished product data)
1

The cost entry method has been described in detail last time, here are some data directly entered to demonstrate.

2

The software has the statistics of the total number of pieces and the statistics of the finished area, because below, you may not notice in use.

3

The information illegally crawled from experience

Step 2: Use the original film
1

Select the "Select Original" button as shown.

2

Check the size of the large board you are using as shown in the figure. You can choose one data, or you can choose multiple, but the premise is that it must be the same thickness of glass.

Step 3: Set the parameters
1

Set general properties: Set parameters based on the actual situation.

2

It is emphasized here that if it is a user of the cutting machine of Butro and Yinrui, it is necessary to choose the general way three-stage formula in the layout complexity. No cutting machine or other cutting machine users choose not to limit.

Step 4: Optimize
1

Click the "Optimize" button on the toolbar.

2

After clicking optimization, the following dialog box will appear. If you have the need to pair, you can select the corresponding button. Then click "OK".

3

The optimized calculation interface is as follows:

4

If you feel that the material rate can be, you can directly point "selection completed".

Step 5: Layout diagram
1

After the optimization is completed, the layout diagram interface as shown in the figure will appear.

2

Select the file format that matches your cutting machine to export the file.

Matters needing attention
1

Here is just the basic operation, some details of the operation can be followed by some of the right content.

2

If you do not understand the place can be your friend after sale.

Recommendation